BAOSHISHAN Digital Water-soluble Silicate Density Meter Sodium Silicate Density Tester Baume Meter Hydrometer with RS-232C Interface Accuracy 0.0001g/cm³ 0~80 Bé° (XF-120WG)

BAOSHISHAN Specifications Model:XF-120WG Weighing range: 0.001g-120g Density accuracy: 0.0001g/cm³ Density range: 0.0001-99.9999/cm³ Time: about 5 seconds Display: Density and volumeOutput mode: RS-232C standard communication interface, can be connected to the printer and computer, convenient test data and print outputNote All products have been checked and packaged in good condition before shipping. After your order is confirmed,the product will be sent to your hands for 7-13 workdays. If you have any question, please feel free to contact with us . We will try our best to give you a satisfactory solution.

• [Parameter]--Weighing accuracy/range: 0.001g/120g; Density analysis: 0.0001 g/cm³; Measurement range: 0.0001-99.9999g/cm³
• [Features]--1.has upper and lower limit setting and buzzer; 2. function of volume expansion coefficient compensation of quartz glass weight; 3.only 50CC is needed for the sample; 4.function of compensating errors caused by air buoyancy; 5.direct reading of liquid specific gravity S.G, gravity Bé°and modulus M; 6.RS-232C standard interface, convenient to output and print the test data
• [Application]--Water-soluble silicate is a mineral binder. Its chemical formula is R2O· nSiO 2. The density of common water glass in civil engineering is generally 1.36-1.50g/cm³, which is equivalent to the Baume degree of 38.4-48.3. The higher the density, the higher the content of sodium silicate and the higher the viscosity.
• [Operation Step]--1.Put the hook on the measuring table and press ZERO to zero; 2.Hang the standard weight on the hook and weigh it. Press ENTER key to store it after stabilization; 3.Put the weight connected with the hook into the liquid to be tested, and store it in ENTER key after stabilization, display density value, press MODE display Baume degree and modulus.